How to create a project wardrobe in the hallway.

Service production of furniture to order is quite popular at the moment. Make up wardrobe project can be in any of the specialized companies. The ordering process is often long, but the result is furniture that fully meets the requirements of the owner of the room.

You can make such a closet yourself.

How is the work done?

To make a wardrobe, you must perform the following steps.

1. Invite a wizard who will make the measurements (you can do it yourself).
2. To make drawings of the wardrobe. The draft indicates all previously received dimensions.
3. Calculations of all elements of furniture are made, the position is calculated shelves.
   
   

   Decide what specific things you plan on making the wardrobe. Make their measurements and plan for them a place in the closet.

4. When working, you can use special programs for designing furniture that are available on the Internet.
5. Send documents to the factory.
6. Install the finished furniture in the room.
   
   

   Follow the drawings very carefully carefully, because then you have to assemble a wardrobe just for them.

How to choose a door?

This is an important element. closetwhich you want to choose carefully. To begin with, it should be said that the framework the doors can be made from aluminum or steel.

The first option is preferable, as it is characterized by reliability and long-term use.

In addition, there are different ways of suspension the doors. Folds can be supported on the lower guide, or suspended on the top.

It all depends on how the coupe is used.

If we are talking about its use as a dressing room, you should choose the second option. In this case, the lower guide will not interfere on the floor due to its complete absence.

Aluminum, from which these components are made, has considerable rigidity, therefore it is almost impossible to damage them under normal operating conditions.

Now it's time to choose the material for manufacturing the door. It may be:

• DSP;
• Hyerkalo;
• WITHflowed with photo printing.

It all depends on your preferences, as well as the location of the closet.

If you install it in the hallway, it is most convenient to choose a mirror, because the functionality of the furniture increases.

The sliding wardrobe with a mirror is a stylish solution that fits any interior.

It is very important to pay close attention to dimensions products, as well as its content. What will be the location shelves inside, depends on the ease of use of furniture. First of all, it is important to consider how to apply closet.

In a standard product, there must be several shelves, drawers, hung for clothes.

Also often used hooks for clothing. Today, special aluminum systems can be used for internal filling, dimensions which may be different.

When drafting a coupe, you should pay attention to the number and type of items that will be stored in it.

Features self-made wardrobe

Have coupe hand made, There are many advantages.First of all, you can be completely confident in the quality of the piece of furniture, realize the location shelves and hooks the way you want.

However, the main difficulty is coupe doors.

You must purchase the following items:

• DWA bolts for fixing support wheels;
• Para support wheels that will help positioning the doors in the lower profile, which is a guide;
• HFour screws for tightening. they are designed to connect horizontal and vertical profiles;
• Pmacaw supports with which the doors positioned at the top;
• Hdirectly the profile itself.

Accessories for the wardrobe.

Using the above items, as well as using drills of various diameters, assemble the frame the doors.

Assembling the door of the wardrobe.

The further process is as follows.

1. Think about how you will make the cabinet body coupe. As a rule, chipboard is used for this purpose.
   
   

   The main material for the manufacture of wardrobe - laminated chipboard.

   You can buy material on specialized bases, you just need to choose a color. At the moment there are a significant number of companies that produce cutting chipboard to create cabinets coupe.
   

   

   Usually a list of parts with dimensions is enough for you to be cut.

   Before contacting such a company, it is necessary to perform all the required calculations, determining dimensions future product.
   

   

   A draft is being drawn up in which all the elements of the wardrobe compartment are drawn.

2. After you prepare project, you must perform the "cutting". In such companies, it is often possible to order the trimming of parts for the coupe. This means that sections of the material are covered with an edge: melamine or plastic.
   
   

   The use of this method increases the life of the wardrobe, making it more durable and reliable.

3. Houses you can begin to build coupe.
   
   

   Installation of the wardrobe frame.

   Using the above fasteners and tools, parts are connected in series.
   

   

   Installation of the wardrobe base.

   Last hanged the doorswhich must be adjusted. Only in this case they will correctly “drive” along the guides.
   

   

   The dimensions for which the draft was compiled should be strictly adhered to.

The final stage is the decoration of the cabinet. The cabinet can be decorated in various ways.

• Glass. If a project includes such an option material, you can choose matte or patterned. Glass is inserted into the door frame.
  
  

  The construction does not look as massive as the usual wooden one, it brings lightness to the interior.

• Sandblasted mirror. This is a special white pattern, which is performed in special chambers with sand under pressure.
  
  

  This design looks like an original, suitable for a variety of interiors.

• Photo printing. If you turn on project doors with an image, you can be sure that guests will not leave your closet without attention.
  
  

  Pictures that are used for the manufacture of such valves, can be different.

  You can either use the base of a specialized company or use your own photos.
  

  

  A film with a picture printed on it is placed under the glass.

• DSP. The most budget is project, in which there are doors made of this material.
  
  

  Everything is simple here - a canvas, whose thickness is about eight millimeters, is inserted into the door frame.

As you can see, an important nuance in the manufacture of the cabinet is the project. It must be compiled in detail and carefully.

From the project depends on the appearance of the wardrobe and the interior as a whole.

VIDEO: Wardrobe closet.

50 photo ideas wardrobes in the hallway: